Kurweil Artificial Intelligence
733 Turnpike St, North Andover, MA 01845, USA
Brain-like device with 500 states instead of binary could one day communicate with live neurons, merging computers with the brain
Stanford University and Sandia National Laboratories researchers have developed an organic artificial synapse based on a new memristor (resistive memory device) design that mimics the way synapses in the brain learn. The new artificial synapse could lead to computers that better recreate the way the human brain processes information. It could also one day directly interface with the human brain.
The new artificial synapse is an electrochemical neuromorphic organic device (dubbed “ENODe”) — a mixed ionic/electronic design that is fundamentally different from existing and other proposed resistive memory devices, which are limited by noise, required high write voltage, and other factors*, the researchers note in a paper published online Feb. 20 in Nature Materials.
Like a neural path in a brain being reinforced through learning, the artificial synapse is programmed by discharging and recharging it repeatedly. Through this training, the researchers have been able to predict within 1 percent of uncertainly what voltage will be required to get the synapse to a specific electrical state and, once there, remain at that state.
“The working mechanism of ENODes is reminiscent of that of natural synapses, where neurotransmitters diffuse through the cleft, inducing depolarization due to ion penetration in the postsynaptic neuron,” the researchers explain in the paper. “In contrast, other memristive devices switch by melting materials at relatively high temperatures (PCMs) or by voltage-induced breakdown/filament formation and ion diffusion in dense oxide layers (FFMOs).”
The ENODe achieves significant energy savings** in two ways:
Unlike a conventional computer, where you save your work to the hard drive before you turn it off, the artificial synapse can recall its programming without any additional actions or parts. Traditional computing requires separately processing information and then storing it into memory. Here, the processing creates the memory.
When we learn, electrical signals are sent between neurons in our brain. The most energy is needed the first time a synapse is traversed. Every time afterward, the connection requires less energy. This is how synapses efficiently facilitate both learning something new and remembering what we’ve learned. The artificial synapse, unlike most other versions of brain-like computing, also fulfills these two tasks simultaneously, and does so with substantial energy savings.
“More and more, the kinds of tasks that we expect our computing devices to do require computing that mimics the brain because using traditional computing to perform these tasks is becoming really power hungry,” said A. Alec Talin, distinguished member of technical staff at Sandia National Laboratories in Livermore, California, and co-senior author of the paper. “We’ve demonstrated a device that’s ideal for running these type of algorithms and that consumes a lot less power.”
A future brain-like computer with 500 states
Only one artificial synapse has been produced so far, but researchers at Sandia used 15,000 measurements to simulate how an array of them would work in a neural network. They tested the simulated network’s ability to recognize handwriting of digits 0 through 9. Tested on three datasets, the simulated array was able to identify the handwritten digits with an accuracy between 93 to 97 percent.
This artificial synapse may one day be part of a brain-like computer, which could be especially useful for processing visual and auditory signals, as in voice-controlled interfaces and driverless cars, but without energy-consuming computer hardware.
This device is also well suited for the kind of signal identification and classification that traditional computers struggle to perform. Whereas digital transistors can be in only two states, such as 0 and 1, the researchers successfully programmed 500 states in the artificial synapse, which is useful for neuron-type computation models. In switching from one state to another they used about one-tenth as much energy as a state-of-the-art computing system needs to move data from the processing unit to the memory.
However, this is still about 10,000 times as much energy as the minimum a biological synapse needs in order to fire**. The researchers hope to attain neuron-level energy efficiency once they test the artificial synapse in smaller devices.
Linking to live organic neurons
This new artificial synapse may one day be part of a brain-like computer, which could be especially beneficial for computing that works with visual and auditory signals. Examples of this are seen in voice-controlled interfaces and driverless cars. Past efforts in this field have produced high-performance neural networks supported by artificially intelligent algorithms but these depend on energy-consuming traditional computer hardware.
Every part of the device is made of inexpensive organic materials. These aren’t found in nature but they are largely composed of hydrogen and carbon and are compatible with the brain’s chemistry. Cells have been grown on these materials and they have even been used to make artificial pumps for neural transmitters. The switching voltages applied to train the artificial synapse (about 0.5 mV) are also the same as those that move through human neurons — about 1,000 times lower than the “write” voltage for a typical memristor.
That means it’s possible that the artificial synapse could communicate with live neurons, leading to improved brain-machine interfaces. The softness and flexibility of the device also lends itself to being used in biological environments.
This research was funded by the National Science Foundation, the Keck Faculty Scholar Funds, the Neurofab at Stanford, the Stanford Graduate Fellowship, Sandia’s Laboratory-Directed Research and Development Program, the U.S. Department of Energy, the Holland Scholarship, the University of Groningen Scholarship for Excellent Students, the Hendrik Muller National Fund, the Schuurman Schimmel-van Outeren Foundation, the Foundation of Renswoude (The Hague and Delft), the Marco Polo Fund, the Instituto Nacional de Ciência e Tecnologia/Instituto Nacional de Eletrônica Orgânica in Brazil, the Fundação de Amparo à Pesquisa do Estado de São Paulo and the Brazilian National Council.
* “A resistive memory device has not yet been demonstrated with adequate electrical characteristics to fully realize the efficiency and performance gains of a neural architecture. State-of-the-art memristors suffer from excessive write noise, write non-linearities, and high write voltages and currents. Reducing the noise and lowering the switching voltage significantly below 0.3 V (~10 kT) in a two-terminal device without compromising long-term data retention has proven difficult.” … Organic memristive devices have been recently proposed, but are limited by “the slow kinetics of ion diffusion through a polymer to retain their states or on charge storage in metal nanoparticles, which inherently limits performance and stability.” — Yoeri van de Burgt et al., Nature Materials
** ENODe switches at low voltage and energy (< 10 pJ for 1000-square-micrometer devices), compared to an estimated ∼ 1–100 fJ per synaptic event for the human brain.
Abstract of A non-volatile organic electrochemical device as a low-voltage artificial synapse for neuromorphic computing
The brain is capable of massively parallel information processing while consuming only ~1–100 fJ per synaptic event. Inspired by the efficiency of the brain, CMOS-based neural architectures and memristors are being developed for pattern recognition and machine learning. However, the volatility, design complexity and high supply voltages for CMOS architectures, and the stochastic and energy-costly switching of memristors complicate the path to achieve the interconnectivity, information density, and energy efficiency of the brain using either approach. Here we describe an electrochemical neuromorphic organic device (ENODe) operating with a fundamentally different mechanism from existing memristors. ENODe switches at low voltage and energy (<10 pJ for 103 μm2 devices), displays >500 distinct, non-volatile conductance states within a ~1 V range, and achieves high classification accuracy when implemented in neural network simulations. Plastic ENODes are also fabricated on flexible substrates enabling the integration of neuromorphic functionality in stretchable electronic systems. Mechanical flexibility makes ENODes compatible with three-dimensional architectures, opening a path towards extreme interconnectivity comparable to the human brain.
*Prices are pre-tax, exclude delivery charges and customs duties, and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes in raw materials prices or exchange rates.